Hexagonal Wire Netting


Hexagonal wire mesh is also known by the name of chicken mesh.

Wire materials: Hexagonal wire mesh is manufactured in galvanized iron or PVC coated wire.

Assortments Available:

Hex. wire mesh in normal twist
Hex. wire mesh in reverse twist
Hex. wire mesh in bidirectional twists
Electro Galvanized before Weaving
Electro Galvanized After Weaving
Hot Dipped Galvanized before Weaving
Hot Dipped Galvanized after Weaving
PVC Coated Before or After Weaving

Application: Hexagonal wire mesh with its good corrosion resistance and oxidation resistance, serves well as strengthening, protection and temperature keeping materials in the form of mesh container, stone cage, isolation wall, boiler cover or poultry fence in construction, chemical, breeding, garden and food processing industries.

 

　　　

　　　

　　　

Galvanized hexagonal wire netting
mesh Min. Gal.v.

G/SQ.M

Width
Wire Gauge (Diameter)

BWG

Inch


 mm Tolerance(mm)
3/8" 10mm ±1.0 0.7mm - 145 2' - 1M 27, 26, 25, 24, 23
1/2" 13mm ±1.5 0.7mm - 95 2' - 2M 25, 24, 23, 22, 21
5/8" 16mm ±2.0 0.7mm - 70 2' - 2M 27, 26, 25, 24, 23, 22
3/4" 20mm ±3.0 0.7mm - 55 2' - 2M 25, 24, 23, 22, 21, 20, 19
1" 25mm ±3.0 0.9mm - 55 1' - 2M 25, 24, 23, 22, 21, 20, 19, 18
1-1/4" 31mm ±4.0 0.9mm - 40 1' - 2M 23, 22, 21, 20, 19, 18
1-1/2" 40mm ±5.0 1.0mm - 45 1' - 2M 23, 22, 21, 20, 19, 18
2" 50mm ±6.0 1.2mm - 40 1' - 2M 23, 22, 21, 20, 19, 18
2-1/2" 65mm ±7.0 1.0mm - 30 1' - 2M 21, 20, 19, 18
3" 75mm ±8.0 1.4mm - 30 2' - 2M 20, 19, 18, 17
4" 100mm ±8.0 1.6mm - 30 2' - 2M 19, 18, 17, 16
Note:
1.) The above tolerance comply with standard EN10223-2:1997;

2.) Minimum Galvanization is only for typical wire diameter as stipulated separately in the column for your reference; Also it is only for hot dipped Galvanized Netting.

 

 

PVC Coated Hexagonal Wire Netting
Mesh Wire Gauge (MM) Width
Inch MM - -
1/2" 13mm 0.6mm - 1.0mm 2' - 2M
3/4" 19mm 0.6mm - 1.0mm 2' - 2M
1" 25mm 0.7mm - 1.3mm 1' - 2M
1-1/4" 30mm 0.85mm - 1.3mm 1' - 2M
1-1/2" 40mm 0.85mm - 1.4mm 1' - 2M
2" 50mm 1.0mm - 1.4mm 1' - 2M
We also offer other specifications you need
Note: The thickness of PVC Coating is usually 0.2-0.4mm, others may arranged as per buyers' request;
Package: Normally each roll packed in water proof paper, then in termo foil (Shrinked Plastic);